Omnipure K5540 BB GAC Granular Carbon Water Filter 2.5" x 10"

Omnipure K5540 GAC-T40  In Line Carbon Filter 

FEATURES & BENEFITS

• Fine filtration of treated drinking water to ingredient water quality
• Helps standardize beverage quality at disparate locations
• Reduces maintenance problems in water-using equipment
• Removes more than 95% of disinfectant chlorine
• Takes out common earthy, fishy, musty tastes and odors
• Filters out fine particulates, including dirt, rust, oxidized iron manganese and sulfide
• Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction

SPECIFICATION

• Part Number: K5540-BB
• Dimensions: 2.5" x 10"
• Capacity: 2,000 Gallons
• Media: Acid Washed 12 x 40 Mesh Carbon Coconut
• Maximum Pressure: 125 PSI
• Temperature: 30-100°F (2-38°C)
• Service Flow Rate: 0.5 GPM (1.9 LPM)
• Threaded fittings must be wrapped with Teflon tape before installation
• Install Teflon taped fittings and tighten firmly
• Flush new cartridge with 5 gallons of water prior to use and check for leaks.
• Replace cartridge when rated capacity is reached, or when flow becomes too slow
• Install in compliance with state and local laws and regulations

TYPICAL APPLICATIONS

• Pre-filtration for RO
• Drinking fountains
• Ice Machines
• Other point-of-use applications

AMCB0404 Male Connector BSP(P) Thread 1/4" - 1/4"

The genuine 1/4 "tube x 1/4" BSP (P) male fitting from DMfit. The connector is made of acetal copolymer, which is one of the strongest thermoplastics. This material is distinguished by very good shape stability. The connector is extremely resistant to physical damage.

The main advantages of DMfit couplings are:

1. durable material,

2. NSF-51 and NSF-61 certified,

3. high burst pressure parameter,

4. no significant deformation with time of use

Coupling made of FDA approved materials .