How To Reset The Water Filter Indicator On a KichenAid Fridge.

Cart

No products

Shipping $0.00
Total $0.00

Prices are tax included

Check out >

How To Reset The Water Filter Indicator On a KichenAid Fridge.There are no products.

There are no products in this category.

How To Reset The Water Filter Indicator On a KichenAid Fridge.

How To Reset The Water Filter Indicator On a Kichen Aid Fridge. Water Filter Indicator and Reset See “Water Filter Indicator” section.

Max Cool The Max Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures.

■ Press MAX COOL to turn on the Max Cool feature. The Max Cool indicator light will remain on for 24 hours unless manually turned off.

NOTE: The temperature display will remain at 34°F (1°C) and -5°F (-21°C) for the refrigerator and freezer compartments, respectively, while the Max Cool feature is enabled.

After 24 hours, the refrigerator returns to the previous temperature set points. Alarm Functions Master Alarm Reset Pressing Alarm Reset once will turn off the audio alarm and indicator light. The audio alarm will not sound again for the current condition that caused the alarm until a new condition occurs or until a Master Alarm Reset is performed.

A Master Alarm Reset can be performed by pressing Cooling (ON/ OFF) twice or by turning the power to the refrigerator off and on again.

See “Power On/Off Switch.” After performing a Master Alarm Reset, the indicator light will reactivate if the condition that caused the alarm is still present.

See “Over Temperature,” “Call Service,” or “Door Open.”