Omnipure K2505-BB Sediment 1/4" Thread NPTF Female Ends

FEATURES & BENEFITS

• Fine filtration of treated drinking water to ingredient water quality
• Helps standardize beverage quality at disparate locations
• Reduces maintenance problems in water-using equipment
• Removes more than 96% of sediment
• Filters out fine particulates, including dirt, rust, oxidized iron manganese and sulfide

TYPICAL APPLICATIONS

• Pre-filtration for RO
• Drinking fountains
• Ice Machines
• Other point-of-use applications

SPECIFICATION

• Part Number: K2505-BB
• Dimensions: 2" x 10"
• Capacity: Depends on specific water condition
• Maximum Pressure: 125 PSI
• Temperature: 35-100°F (2-38°C)
• Service Flow Rate: 0.75 GPM (2.8 LPM)
• Threaded fittings must be wrapped with teflon tape before installation
• Install Teflon taped fittings and tighten firmly
• Flush new cartridge with 5 gallons of water prior to use and check for leaks.
• Replace cartridge when rated capacity is reached, or when flow becomes too slow
• Install in compliance with state and local laws and regulations

AMCB0404 Male Connector BSP(P) Thread 1/4" - 1/4"

The genuine 1/4 "tube x 1/4" BSP (P) male fitting from DMfit. The connector is made of acetal copolymer, which is one of the strongest thermoplastics. This material is distinguished by very good shape stability. The connector is extremely resistant to physical damage.

The main advantages of DMfit couplings are:

1. durable material,

2. NSF-51 and NSF-61 certified,

3. high burst pressure parameter,

4. no significant deformation with time of use

Coupling made of FDA approved materials .