Zip GENUINE MicroPurity 93701 Residential Hydrotap Water Filter - 0.2 Micron
Based on 1 customers advices.
The Zip 93701 MicroPurity 0.2 micron water filter suits residential Zip Hydrotap systems manufactured from February 2017 moving forward Hydrotap boiling, chilled and filtered water system incorporates advanced triple action filtration to protect you and your equipment from harm and damage.
• Genuine Zip Brand for peace of mind
• Fits all Residential Hydrotap G4 Systems delivered after February 2017
• Removes Sediment, Chlorine, Taste & Odours and Limescale
• Protects from Cryptosporidium, Giardia and Lead
• Antimicrobial properties for peace of mind
The unique 93701 Zip Hydrotap 0.2 Micron Water Filter Cartridge reduces dirt, rust, sediment, chemicals, chlorine, taste & odours and lead from your water supply while protecting your Zip Hydrotap from internal scale-up.
The superfine 0.2 Micron filter rating ensures that bacteria such as cryptosporidium and giardia are removed from your water supply and is independently tested and certified by NSF to standards 42 and 53 for your peace of mind.
This filter contains naturally occurring antimicrobial properties that are used to prevent bacteria growth inside the filter cartridge - added protection for you and your family This filter is capable of filtering 4,163 Litres
Why is it important to replace my Zip Filter? The 93701 Zip Filter Cartridge core is produced from high-quality carbon granules.
The carbon adsorbs chemicals and chlorine from our water to ensure safe and great-tasting water. Over a 12-Month period, carbon loses its ability to adsorb and needs to be replaced. For health reasons, never use carbon filters which are more than 12 months old.
Model #: 1Z-LS
Order Code: 93701
Capacity: 4,163 Litres
Brand | Zip |
Model Number | 93701 |
Item Weight | 998 g |
Package Dimensions | 25 x 13 x 13 cm |
Zip MicroPurity 0.2 micron filter for Residential HydroTaps manufactured after February 2017. Capable of filtering 4,163 Litres. Independently tested and certified by NSF to standards 42 and 53. Certified for the removal of Chlorine, Taste and Odour, particles larger than 0.2 microns in size, Cryptosporidium, Giardia and Lead. The filter also contains a naturally occurring antimicrobial that is used to prevent bacteria growth inside the filter.
Step 1: Grab an empty bucket or container to collect the water which will be flushed through the system and a cleaning cloth or old towel to mop up any spills.
Step 2: Press (Menu – Installation – Filter Flush) Start and stop should be now on your screen.Step 4: Place cleaning cloth / old towel underneath the filter cartridge, to catch any water that may spill. Gently hold the filter cartridge then press the red lever at the top right of the unit (Note: models made after 2017 do not have the red lever) and rotate the cartridge a quarter turn to the left. The cartridge should detach and you should be able to pull it free in a downwards motion. Some water may drip from the cartridge at this point. Be sure to keep the cartridge level to avoid spills.
Step 5: Place spent cartridge in the sink or other suitable container.
Step 6: Unpack your replacement cartridge and remove the sanitary cap. Write today’s date where shown on the label. Ensure you avoid touching the O-rings or filter opening as this can cause bacterial contamination of the cartridge.
Step 7: Slightly moisten the O-rings with regular tap water and line up the front cartridge label to the left.
Step 8: Gently but firmly push the cartridge up into the filter head and turn a quarter-turn to the right – as far as it will go without forcing it. The cartridge should now be locked in position with the front label facing forward.
Step 9: Turn the stop valve ON by rotating the lever clockwise until it is in line with the hose.
Step 10: Then press [Start] to begin the process. Ensure you run at least 10-litres of water through to flush the filter of excess black carbon particles.
Step 11: When 10 litres have passed through the filter, turn the stock valve OFF by rotating the lever anti-clockwise until it is perpendicular to the hose.
Step 12: Press [Stop] to end the filter flush process.
Step 13: Press [back arrow]. This will take you back to the Install page.
Step 15: Dispose of used cartridge and packaging thoughtfully.
Note: If you are carrying out this flush after the HydroTap’s initial installation, the unit will go directly into calibration mode after the Filter Flush Mode is turned off. With any subsequent filter changes the system will automatically revert to the main menu.
This 93701 suit for
HydroTap G5 BC Home
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
we are the cheapest fridge part dealer in Australia
More inquiry about this filters? Call us 1300 767 072 or Email us sales@waterfilterforfridge.com.au
|
Phone: 02 9695 7740 | Email: sales@waterfilterforfridge.com.au | SAME DAY DISPATCH ORDER BEFORE 1PM