Resin Limescale Filter WITH UDF 10x 2.5 DROP IN FILTER

10"x2.5" DI RESIN WATER FILTER CARTRIDGE

Filled with +/- 600g of DI resin and measures +/- 25cm in length x +/- 7cm in width

RO Filter Cartridge Transparent 10'' Resin Filter Water Softener Ion Exchange Resin Fit All 10-inch Water Filter Housing

The AQUA BLUE H20 F-REN-14  cartridge has been developed in response to the requirements for deionized water in many industrial needs. This high-capacity, semi-conductor-grade resin cartridges are ideal for use in pharmaceutical and medical laboratories, cosmetics, and circuit board printing applications.

This cartridge is convenient and cost-effective for many applications where low levels of total organic carbon (TOC) and total dissolved solids (TDS) are required.

Common Uses

• Window Cleaning (Streak Free)
• Car Detailing (Spot Free Rinse)
• Aquarium (for Fresh and Salt Water)
• Drinking Water* (Remove ALL impurities) *must be used before an alkaline filter for drinking
• Dental & Medical (Pure water for sterilisation machines)

Storage and Safety Instructions

• Store DI Resin in the shade and do not allow the resin to dry. Keep sealed at all times. Exposure to atmospheric air will cause the Resin to convert to a carbonate form. Keep below 60°C.
• Acid and Alkali solutions are corrosive and should be handled carefully. Prevent contact with skin and eyes. If oxidizing agents are used, safety precautions should be observed.