Q5566 Q5666 Omnipure Fluoride removal Replacement Filter Cartridge

Operating Specifications Capacity: Approx. 500 Gal. Fluoride Reduction Flow Rate:

0.5 GPM Maximum Pressure: 125 PSIG Temperature: 35-100_ F (2-38_ C)

General Installation/Operation/Maintenance Requirements _

Note flow direction of filter. _

Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings.

If leaks persist, discontinue use and call your supporting dealer. _

Replace cartridge when rated capacity (500 Gal.) is reached, or when flow becomes too slow. _

Install in compliance with state and local laws and regulations.

Special Notices _

The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water. _

A Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.