Omnipure Q5567 Q5550 1/2 lb KDF / GAC Filter + Non Valved Head 1/4" Quick Fit

Genuine Omnipure Q5567 Q-Series 1/4 lb KDF / GAC Filter replaces Q5550 

with Q-Series Non Valved Head 1/4" Quick fit

Details
Fine filtration of treated drinking water to ingredient water quality
Helps standardize beverage quality at disparate locations
Reduces maintenance problems in water-using equipment
Removes more than 95% of disinfectant chlorine
Takes out common earthy, fishy, musty tastes and odors
Filters out fine particulates, including dirt, rust, oxidized iron manganese and sulfide
Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction
KDF 55 reduces heavy metals, control bacteria and algae growth and remove chlorine and chloramine taste & odor.

Typical Appications
Pre and Post filtration for RO
Drinking fountains
Ice Machines
Other point-of-use applications
Food services

Specifications
Part Number: Q5567 Q5550 
Dimensions: 2.5" x 10"
Filtration Media: Granular Activated Carbon 12 x 40 Mesh and 0.5 Lb of KDF 55
Maximum Pressure: 125 PSI
Temperature: 30-100°F (2-38°C)
Service Flow Rate: 0.5 GPM (1.9 LPM)
Threaded fittings must be wrapped with Teflon tape before installation
Install Teflon taped fittings and tighten firmly
Flush new cartridge with 5 gallons of water prior to use and check for leaks.
Replace cartridge when rated capacity is reached, or when flow becomes too slow
Install in compliance with state and local laws and regulations

Q-Series Non Valved Head 1/4" Quick fit
The Omnipure Q-Series Valved Head is one of the unique features of the Omnipure Twist-Tap System.
Suits WL and Q series Quick Change Series Filters