The OMNIPURE Q5515 is a 1 micron Carbon Block Lead Reduction Water Filter. The OMNIPURE Q5515 Carbon Block Lead water filter is very user-friendly. Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist. The new Q5515 filter body is just as easily threaded into the head and the replacement is then complete. The OMNIPURE Q5515 is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. The OMNIPURE Q5515 can be used as a pre or post filter for Reverse Osmosis Systems, beverage equipment, drinking water fountains, ice machines, and other point-of-use applications. The OMNIPURE Q5515 GAC lead water filter is a granular activated carbon block filter used to reduce cysts, lead, taste, odor and chlorine taste and odor.
- Twist in design for use with threaded permanent head systems
- 2-1/2 in. O.D. x 10 in. of length
- Carbon block with lead specific media to reduce lead, chlorine taste and odor as well as other contaminants
- 1 micron filter
- 0.5 GPM flow rate
Model Number Breakdown Q5515
Q ► Q Filter Series (Quick Change- Screw in type)
55 ► Size, 2.5” by 10”
15 ► Media Code, 1 Micron superior carbon block with specialized lead removal media
Specifications
Dimensions
Product Depth (in.): 10.375
Product Height (in.): 10.375
Product Width (in.): 2.625
Details
Brand/Model Compatibility: OMNIPURE
Filtration method: Carbon Block
Product Weight (lb.): 1.055lb
Water Filtration System Type: Under Sink
Flow Rate | 0.5 gpm |
Maximum Operating Pressure | 125 psig |
Operating Temperature | 2 to 38 ºC35 to 100 ºF |
Rated Capacity | 1,250 gal/1 Year |
Reduction Claim | Lead, cyst, chlorine, taste, color, odor, and VOC reduction |
Flow Capacity | 1,250 gal2,500 gal |
Filter Diameter | 2.5 in |
Available Lengths | 6 in8 in10 in12 in14 in |
Available Thread Size | 1/8 in1/4 in |
Thread Type | National Pipe Thread (NPT) - Female |
Filter Size | 1 µ |
Standards | NSF (National Sanitation Foundation) |
Filter Head Type | Non-ValvedValved |
System Tested and Certified by NSF International against ANSI / NSF Standard 42 for the reduction of Chlorine Class I and Taste and Odor, and against Standard 53 for the reduction of Lead and Cyst. |
- Note flow direction of filter.
- Flush new cartridge with 5 gallons of water through filter at the rated service flow before use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
- Replace cartridge when rated capacity is reached, or when flow becomes too slow.
- Install in compliance with state and local laws and regulations.
|
- Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
- Do not use with water that is micro biologically unsafe or of unknown quality without adequate disinfection before or after the system.
|
Standard media includes granular activated carbon for taste and odor reduction, polypropylene depth filtration for removal of grit and sediment, and polyphosphate to control lime and scale deposits. Also, a wide variety of specialty and custom media options are available as well as a corresponding RO membrane body for use in reverse osmosis systems. Eliminates taste and odor. Filters out sediment. Protects equipment.
The Q-Series is designed to give our customers a high quality, economically priced alternative to similar products on the market. Our engineering and production expertise enables us to offer both the initial unit and the replacement bodies at a significantly lower price than the competition. The Q-Series is produced with a diameter of 2.5 in and lengths of 6 in, 8 in,10 in, 12 in and 14 in. Quick-Connect 1/4 in fittings are available on this series. Female threads are available in 1/4 in and 3/8 in NPT.
Water filter heads sold separately. |
Phone: 02 9695 7740 | Email: sales@waterfilterforfridge.com.au | SAME DAY DISPATCH ORDER BEFORE 1PM