Stage 1 - 5 Micron Pre Filter

• Taste & Odour

• Chlorine

• Particulate Class I

• Cysts (Cryptosporidium & Giardia) 99.999%

• Turbidity ,impurities 99.69%

• Lead 98.3%

• Bacteria (E.Coli, Cholera, Shigella, Salmonella) 99%.

Stage 2 5 Micron  Carbon block 

Omnipure OMB934 5 Micron Carbon Block Filter Cartridge

The Omnipure OMB934-5M premium carbon block cartridge offers high capacity taste and odour reduction, making this cartridge ideal for undersink drinking water filter systems.
Manufactured in the USA using NSF listed materials using Omnipure patented OmnipureBlock carbon technology, the OMB934-5M is compressed from high quality activated carbon which similtaneously remove chlorine taste and odour and organic chemicals as well as good capacity dirt-holding capacity. This unique combination allows these filters to be installed as a stand alone water filter, performing the role of both a sediment and activated carbon filter.

This cartridge suits standard 10" housings in Australia.
Service Life: 6,000 Gallons / 6-12 Months

Features & Benefits

- Chlorine taste and odour reduction
- Suits standard 10" housings in Australia
- Made in USA from NSF listed materials

The OMNIPURE OMB 934 replacement water filter is suitable for
- Water Heaters and Coolers
- Residential and Commercial Water Filter Systems
- Pre and Post Reverse Osmosis Filtration
- Food Service Industry

General Installation
- Flush new cartridge for 10 minutes prior to use
- Replace cartridge when rated capacity is reached, or when flow becomes too slow.
- Install in compliance with state and local laws and regulations

Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacture's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.

Operating Specifications
- Max Temp (°F): 125
- Min Temp (°F): 40
- Cap Material: Polypropylene
- Capacity: 6,000 Gallons, 6-12 Months
- Cartridge Style: Drop-In
- End Cap Type: Double Open Ended (DOE)
- Filter Application: Sediment/Dirt/Rust, Chlorine/Taste/Odor
- Initial Pressure Drop: 2.0 PSI Differential
- Media Type: Coconut Shell Carbon Block
- Micron Rating (Nominal): 5 µm
- Netting: Polypropylene
- Origin: USA
- Outer Diameter: 2-1/2"
- Inner Diameter: 1-1/4"
- Certifications: NSF 42
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Stage 3 

UPC l 0701003123634

Omnipure OMB934-1M

Omnipure's OM-Series filters contain the new OmnipureBlock media, a high quality carbon block made entirely at Omnipure's manufacturing facility. As a 9.75" cartridge, the OMB934-1m fits most standard 10" housings. Sediment up to 1 micron, chlorine, taste and odor are reduced by the carbon block core.

Specs

Stage 4 

Omnipure K2540 SS 1/4" QC Elbow Carbon Block Inline Filter