Omnipure L Series L5505 Quick connect replacement water filter with L-Series Valved Head with 1/4" Quick Connect Fittings
Flow Rate | 0.5 gpm |
Maximum Operating Pressure | 125 psig |
Operating Temperature | 35 to 100 ºF |
Rated Capacity | Dependent on Influent Water Quality |
Reduction Claim | Dirt, sand, and sediment reduction |
Body Size | 2.5 x 10 in |
Filter Head Type | Non-ValvedValved |
The L-Series filter housings and fillings have been rested for performance under NSF Standard 42. Tests included Hydrostatic Testing at 300 psig and Cycle Testing of 100.000 Repetitions from 1 to 150 psig. Complete test results are available from OMNIPURE. Omnipure products have been tested and listed under Standard 42 for taste, odor and chlorine reduction. or particulate reduction. or have been materials certified. All filters should be installed on cold water lines only. |
Two and one half inch diameter filler bodies.
Activated Carbon Filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or alter the unit. |
Omnipure L-Series Valved Head with 1/4" Quick Connect Fittings
Omnipure L Series Quick connect head and bracket.
Made in the USA.
Will suit all the Omnipure L series water filters cartridges.
Has built in 1/4″ John Guest tube fittings.
80mm across x 75mm front to back of bracket.
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
we are the cheapest fridge part dealer in Australia
More inquiry about this filters? Call us 1300 767 072 or Email us sales@waterfilterforfridge.com.au
Phone: 02 9695 7740 | Email: sales@waterfilterforfridge.com.au |
SAME DAY DISPATCH ORDER BEFORE 1PM