K-Series

Home>Omnipure Filters>K-Series>Omnipure K2540-JJ Undersink Kit Set - PLV, JG ADV10, Faucet, Hose Kit

Omnipure K2540-JJ Undersink Kit Set - PLV, JG ADV10, Faucet, Hose Kit

Omnipure K2540-JJ Undersink Kit Set - PLV, JG ADV10, Faucet, Hose Kit
Omnipure K5520 JJ UnderSink Kit Set Includes PLV , JG ADV10, Faucet, Hose Kit. UPC: 799932587542

More details

On sale! FREE DELIVERY ON OVER $100 Total Price: $114.00 tax incl. Each: $114.00 tax incl.

RRP : $169.00 each tax incl.

You save: $55.00 (33%)

K2540-JJ UnderSink Kit Set+ ASV10 ( JG) +PLV+FAUCET B

Add to cart

Add to my wishlist

Share This Page!

Average votes for this product

Average : 0 / 5
Based on 0 customers advices.

 

 

Omnipure K2540-JJ UnderSink Kit Set Includes PLV , JG ADV10, Faucet, Hose Kit

Omnipure K-Series  K2540-JJ GAC Filter Cartridge, also known as K2533, is commonly installed as post filter for under sink Reverse Osmosis systems. Omnipure inline filter uses 1/4" quick connect fittings that make filter exceptionally easy to install on copper or plastic wter lines. 

 

Specifications

Flow Rate

0.5 gpm

Maximum Operating Pressure

125 psig

Operating Temperature

2 to 38 ºC35 to 100 ºF

Rated Capacity

1,500 gal/1 Year

Reduction Claim

Chlorine, taste, color, and odor reduction

Flow Capacity

1,500 gal

Standards

ANSI (American National Standards Institute)NSF (National Sanitation Foundation)

ANSI (American National Standards Institute) / NSF (National Sanitation Foundation) International Standards

System Tested and Certified by NSF International against ANSI / NSF Standard 42 for the reduction of Chlorine, Class 1 and Taste and Odor.

General Installation / Operation / Maintenance Requirements

  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (1,500 gallons) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

 


Faucet : Water Filter Reverse Osmosis Faucet Tap With Black Lever: 

· Lead Free Drinking Water Faucet
· Standard non air gap faucet
· water filter faucet Uses 1/4" Supply Tube
· 360 degree free swivel
· Fits all under counter water filter systems


ASV10 Acetal Angle Stop Valve Install 1/2" x 1/2" x 1/4" Tube: 

Acetal-Angle-Stop-Valve02.jpg

The valves are for use with potable water. The valves are not to be used with compressed air, explosive gases, petroleum spirit and other fuels or for heating system.
Push – fit technology
Quick disconnection without the need for tools.
EPDM ‘o’ rings
Intended for use with potable water
Incorporates integral style check valve and a ¼ turn chrome plated ball valve


1/4" Tube 350kpa / 50 PSI Pressure Limiting Valve PLV Water Filter: 

Pressure Limiting Valve 350Kpa 50psi Filter Protection Valve Pressure Reduction Valve with 1/4" Quick Connect Push Fit In and Out Suitable for High pressure systems to protect drink dispensers e.g. Water filters, ice makers, coffee machines and reverse osmosis machines. Prevent water hammer and back flow. Australian/New Zealand Watermark Approved Highly recommended when installing water filter systems.

- Integral Check Valve

- Resists water hammer.

- Stops backflow.

Pressure limiting valve in 350kpa with back flow prevention.

Watermark AS1357.2 Lic 23133

NSF : Certified to NSF/ANSI 61 Section 9

Limiting valve: 350kpa (50 PSI)

Flow: 7.5L/Min at 700 Kpa (100 PSI)

Max Pressure: 1600 Kpa (230 PSI)

Max Temperature: 40C

1/4" john guest type tubing connections

Ideal for a reverse osmosis filter system to limit the pressure applied to the system

 

 

EXTERNAL WATER FILTER + HOSE (5M 1/4") KIT SET

 

APEX FMP 350 KPA WITH 1/4" TUBE PORTS

 

JOHN GUEST (1M 1/4") HOSE TUBING HIGH PRESSURE

 

 

 

 

 
Omnipure K2540-JJ Undersink Kit Set - PLV, JG ADV10, Faucet, Hose Kit

Omnipure K2540-JJ Undersink Kit Set - PLV, JG ADV10, Faucet, Hose Kit

We would like to hear your experience using this product. Your feedback helps us to improve our products quality & continue providing great products. We really appreciate that!


*



Please log in to leave new review | Log in
Post a review and try to win a voucher.

No reviews at this time.





Omnipure K2540-JJ Undersink Kit Set - PLV, JG ADV10, Faucet, Hose Kit (114 AUD )