Generic Hybrid-G7/R2 Replacement UV Lamp and Filter Service Kit Suit Puretec

• Advanced Benefits
• Genuine  UV GUARD UV lamp and sleeve
• Genuine AQUA BLUE H20  cartridges
• Kit-Buy Savings

Puretec Hybrid G7 Replacement Parts 

Suits the Puretec Hybrid G7 whole-of-house filtration systems replacement filters and UV parts.

1 x 1st Stage: ABPL2045-5M Pleated Washable 5 micron sediment filter reduces dirt and sediment. (replace as a required maximum of 12 months)

Washable Sediment Prefilter

Extend the life of your sediment prefilter by rinsing the dirt from the cartridge regularly.  We recommend rinsing out the pleated cartridge using a garden hose.  You can also use a scrubbing brush to gently dislodge any large sediment particles.  Run the brush-up and down the length of the pleated cartridge with the bristles in between the pleats.  Be careful not to damage the filter fabric by scrubbing it too thoroughly. 

1 x 2nd Stage: ABCTO2045-10M  10-micron Whole House  20” x 4.5" COCONUT CARBON BLOCK  Filter NSF42

Features & Benefits
• Combined with High-quality PP sediment filter and GAC function together.
• Remove dust, and odors at the same time.
• High void volume, low-pressure drop, and excellent dirt holding capacity.
• Formed by wrapping PP-GAC without the use of any binders and adhesives.
• High chlorine reduction.
• Coconut shell activated carbon.

1 x 11066 (RL6) AQUA GUARD Brand UV LAMP for  Puretec 46 to 50 watt UV Lamp with 4 pins at one end. Dimensions 525mm (including pins) x 18.5mm (replace at 12 months)

1 x 21017 (RQS6) AQUA GUARD Brand Quartz sleeve (needs to be cleaned every 12 months and replaced if damaged or unable to clean to transparency) 

2 x 830 sleeve o-rings AQUA GUARD Brand  (replace every time you remove the quartz sleeve for cleaning)

This filter set suits the Puretec Hybrid-G7, Hybrid-R2 systems, and more  Suits HR-G7R2 and R1 20″