ASAB0607 SAB - Stem Adapter BSP(P) Thread 3/8″stem x 1/2″BSP

DMfit ASAB0607 — 3/8″ Stem × 1/2″ BSP(P) Male Stem Adapter

The DMfit ASAB0607 connects a 3/8″ push-fit connector to a 1/2″ BSP parallel-threaded female port. The smooth 3/8″ stem inserts into a compatible 3/8″ push-fit fitting, while the male BSP thread screws into the female port.

Specifications

How to check the size: Measure the outside diameter of the smooth stem and the outside diameter across the male thread. BSP sizes are nominal, so a 1/2″ BSP thread does not measure 1/2″ (12.7 mm) across the thread.

Before ordering: Check both connections on your existing fitting. The stem must fit a 3/8″ push-fit connector, and the threaded end must match a 1/2″ BSP female port. This is a stem adapter; the smooth end is designed to insert into a push-fit fitting, rather than connect directly to loose tubing.

Installation note: A parallel BSP thread needs a suitable seal at the mating connection. Check that the receiving port has the appropriate washer or sealing arrangement before installation.