3M AQUA PURE AP9151 AP9000 system Replacement Filter Generic

Aqua Blue H20 AB912WF Water filter

Replaces 3M AP9151  using   AP9000 SYSTEM 

(This filter is longer than original AP9151. Please check size before purchase)

Reduces: *Sediment *Offensive Taste & Odour

*Bacteria *Chlorine *Benzene *Girdia & Cryptosporidum

Contains: Scale inhibition media.

The InSinkErator Replacement Filter Cartridgereduce chlorine taste and odor, lead, mercury, asbestos, cysts and chemicals for clean and healthy water.

These cartridges make replacing old cartridges fast and easy without contact with used filter material.

• Reduce chlorine taste and odor in water for a clean and refreshing taste

• Reduce lead, mercury, asbestos, parasitic cysts and chemicals in drinking water 

• For use with InSinkErator water filtration systems

• Last up to 12 months, depending on water quality and usage

• Replaces old cartridges quickly and easily without requiring contact with used filter material

• Twist-and-lock design

• Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
  

• To ensure optimal performance and hygiene and to prevent build up of contaminants, we recommend Aqua Blue H20 filters are not used any longer than 12 month.

ZIP REPLACEMENT FILTER AB912WF SPECIFICATIONS:
• Filter Type:Carbon & Sediment Combination Filter.
• Fits: Zip 912 filter heads
• Filter micron rating: ~5 micron
• Impurities Reduction:
- Reduces Chlorine which causes bad taste and odour.
- Reduces offensive contaminants like asbestos, rust and dirt and general sediment.
- Reduces Limescale – saves energy consumption; heating elements last longer.
- Does NOT remove fluoride
• Capacity: 1,250 litres / 2,900 gallons
• Replacement Cycle:
- For Commercial, High Volume siteslike coffee machines in a retail/restaurant environment,replace every 6 months.
- For more domestic or lower volume sites–replace every 12 months.
- Or when rated capacity of 11,355 litres is reached
- When water pressure drops below 10 psi (often due to excessive sediment which can block the filter up sooner)
- When there is an off-taste in the water
• Operating temperature range: 0.6°C - 33°C
• Note:Not to be used with hot water (through filter)
• Installation:Must be installed vertically, using shortest possible length of tubing, with pressure reducing and check valve inline before filter. (Operating pressure 172 to 860 kPa)
• Flush: at full flow for 10 minutes to purge air and clear carbon fines before use
• Dimensions: 23cm (length) x 8.25cm (diameter)

Water Filter Reduces the Following Health Related Contaminants:
97.60% of Chlorine Taste and Odour
98.40% of Particulates (Class I)
96.60% of Mercury at pH 6.5
88.90% of Mercury at pH 8.5
99.30% of Lead at pH 6.5
99.40% of Lead at pH 8.5
99.99% of Cysts
98.70% of Carbofuran
99.80% of p-Dichlorobenzene
99.00% of Asbestos
96.40% of Benzene
98.60% of Turbidity

BEST PRICE GUARANTEE

We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.

Just email: info@waterfilterforfridge.com.au (please allow for freight component)

IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.

waterfilterforfridge.com.au

We are the cheapest fridge part dealer in Australia