FiltaMate Pressure Limiting Valves

Cart

No products

Shipping $0.00
Total $0.00

Prices are tax included

Check out >

600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX)

600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX)
600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX) NOW ON SALE  $55

More details

FREE DELIVERY ON OVER $100 $55.00 tax incl.

RRP : $99.00 each tax incl.

You save: $44.00 (44%)

FMBP 600

Add to cart

Share This Page!

Average votes for this product

Average : 0 / 5
Based on 0 customers advices.

FMBP600 kPa Filtamate®

- Pressure Limiting Valve

600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port (FILTAMATE APEX)

Features/Benefits : 

  • FM & FM 1/2 are precision machined from high quality NZ brass. FM valve is nickel plated.
  • Integral dual check valves help prevent backflow (Not included all models - see specifications and product codes below).
  • Integral line strainer protects device and eliminates need for additional strainer to be fitted upstream. (Not included all models - see specifications and product codes below).
  • FiltaMate resists water hammer and limits water pressure to filters thus avoiding costly water damage.



 

Standards :

  • Complies with NZ Building Code G12 (2001)
  • Complies with NZS 4608:1992
  • Australian Watermark Approval AS1357.2 Lic. 02596
  • Australian Watermark Approval AS2845.1 Lic. 21876 (FM, FM 1/2 only)

 

 

Product Description :

  • High pressure systems to protect downstream components, e.g. Water filters, drink dispensers, ice makers, coffee machines and reverse osmosis machines.
  • Reduces pressure to 600 Kpa
  • Mobile homes and caravans where a connection is available to mains water.

 

 

 

Installation :

  • Installation must be carried out by a Qualified Person.
  • All pipe work must be flushed prior to installation.
  • Do NOT apply heat near valve during installation.
  • Must be fitted downstream of approved isolating valves.
  • Must be installed in the direction as indicated by the flow arrow.
  • Must be protected by a line strainer (See specifications and product codes for valves with integral line strainer).
  • Must be installed according to local regulations.
  • May be fitted in any orientation.
  • Warranty is limited to any fault found in a valve due to poor workmanship or materials that is returned to Apex Valves Ltd within 1 year from the date of manufacture.
  • If thermal expansion (due to heating, cooling) or back pressure can occur downstream, an expansion valve must be fitted to relieve the excessive pressure build up.



Note:The FiltaMate valve opens and closes automatically every time water is drawn through it. As it is a mechanical device we recommend that it is replaced every 5 years or sooner in high usage installations.



FMBP 600 kPa Filtamate® Specifications :

Inlet15mm, 1/2" BSP (female)
Outlet1/4" John Guest connector
Length98mm
Flow Rate14 L/min at 700 kPa [100psi] inlet pressure
Check Valve10:1 (for every 10 kPa [1.5psi] increase in inlet pressure above 1000 kPa [150psi], the outlet pressure will increase by 1 kPa [0.145psi]).
Outlet Pressures600 kPa +/- 10% @ 1000 kPa [150psi] inlet pressure
Max inlet pressure1600 kPa [230psi]
Max temperature40°C [105°F]
Min temperature1°C
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
 
600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX)

600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX)

600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX) NOW ON SALE  $55

Write a review !


*





No reviews at this time.





600kPa 1/2" BSP brass inlet / plastic with 1/4" JG outlet port( FILTAMATE APEX) (55 AUD)