Billi 994004 Replacement Water Filter for High Sediment Areas HSD (Replaced with 994054)
Based on 0 customers advices.
994004 HSD Replacement Filter for the Billi 911014 Filter Unit
Product Code: 994004
Swing Change HSD micron replacement filter set. New 4 stage Fibredyne™ technology.
Billi’s new range of filtration. Due to the unique layered structure of the Fibredyne™ technology, the new range of Billi filters ensures:
This means you only require a single filter as opposed to the dual filter set.
Please note. if you are changing to a new SINGLE FILTER from the DUAL FILTER SET for the first time, please ensure you purchase the FILTER INSERT part number 854100.
The Billi 994004 replacement water filter cartridge will Remove/Reduce Dirt, Rust, Sediment Particles, Chemicals, Chlorine.
Triple Action Filter with Scale Inhibitor to help stop scale build up and protect elements and boilers.
The 994004 filter now replaces many of the older Billi swing change filters including the twin filter sets.
Replaces single filters 994001, 990402, 994002, 990356, 990413, 990415
Replaces twin filter sets 990412 and 990414 by using a 994004 in the left-hand side and a reusable filter by-pass insert 854100 in the right hand side, as the new 4 stage filter does the job of the old twin filter set.
The 994004 filters suits the following systems, Eco, Quadra, Eco and Quadra Sparkling, Sahara, Plus systems and the Alpine 125
Cartridge recommended service life 12 months
Dimensions 270mm over all x 83mm
- Filtration Capability: Sediment, Taste, Odour
- Flow Rate: 3.8 Lpm
- Water Pressure: 120 kPa min - 1,000 kPa max
- Capacity: 20,000 litres
- Water Temperature: 40°C Must not freeze
- Billi recommends you change your filter at least every 12 months. If the unit is switched off for more than 48 hours, flush for 2 minutes.
No reviews at this time.