Reduces: 99% *Sediment *Offensive Taste & Odour
*Bacteria 98.99% *Chlorine *Benzene *Girdia & Cryptosporidum
Contains: Scale inhibition media.
Replaces 3M AP9000+ and AP9400+ filter systems
AB912WF Replacement filter cartridge provides high quality water by reducing sediments*, chlorine, taste and odour*, bacteria and protection from Protozoan Cysts, Cryptosporidium and Giardia at flow rates up to 3.8 lpm.No activation required which means easy to change cartridge in seconds. Replacement cartridge for AP9000+ and AP9400+ Water Filter System
Operating Specifications:
* 0.2 MICRON FILTERS
• Minimum operating temperature ...................... 0.6°C / 33°F
• Maximum operating temperature .................... 38°C / 100°F
• Min. working pressure ................................ 172 kPa / 25 psi
• Max. working pressure ............................. 862 kPa / 125 psi
• Rated capacity ......................... 13,250 liters / 2,900 gallons
• Flow rate .................................................................. 3.8 lpm
For Coldwater use only. Protect from freezing.
ZIP REPLACEMENT FILTER AB912WF SPECIFICATIONS:
• Filter Type:Carbon & Sediment Combination Filter.
• Fits: Zip 912 filter heads
• Filter micron rating: ~5 micron
• Impurities Reduction:
- Reduces Chlorine which causes bad taste and odour.
- Reduces offensive contaminants like asbestos, rust and dirt and general sediment.
- Reduces Limescale – saves energy consumption; heating elements last longer.
- Does NOT remove fluoride
• Capacity: 1,250 litres / 2,900 gallons
• Replacement Cycle:
- For Commercial, High Volume siteslike coffee machines in a retail/restaurant environment,replace every 6 months.
- For more domestic or lower volume sites–replace every 12 months.
- Or when rated capacity of 11,355 litres is reached
- When water pressure drops below 10 psi (often due to excessive sediment which can block the filter up sooner)
- When there is an off-taste in the water
• Operating temperature range: 0.6°C - 33°C
• Note: Not to be used with hot water (through the filter)
• Installation:Must be installed vertically, using shortest possible length of tubing, with pressure reducing and check valve inline before filter. (Operating pressure 172 to 860 kPa)
• Flush: at full flow for 10 minutes to purge air and clear carbon fines before use
• Dimensions: 23cm (length) x 8.25cm (diameter)
Water Filter Reduces the Following Health-Related Contaminants:
97.60% of Chlorine Taste and Odour
98.40% of Particulates (Class I)
96.60% of Mercury at pH 6.5
88.90% of Mercury at pH 8.5
99.30% of Lead at pH 6.5
99.40% of Lead at pH 8.5
99.99% of Cysts
98.70% of Carbofuran
99.80% of p-Dichlorobenzene
99.00% of Asbestos
96.40% of Benzene
98.60% of Turbidity
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
We are the cheapest fridge part dealer in Australia
Phone: 02 9695 7740 | Email: sales@waterfilterforfridge.com.au |
SAME DAY DISPATCH ORDER BEFORE 1PM